|
Design Project 2 Logic 271 Vending Machine Amber Hoar
|
|
New Frontiers in Adaptive Experimental Design for Multi-Objective Optimization
|
|
WEEK 9: This week I set out to debug debug debug. And also install a camera! I got the camera set up and I did some testing, some debugging, but things are not 100% worked out just yet. So, next…
|
|
WEEK 8 This week I implemented the Due as the Main Control device, and switched the Uno to solely be a drive control slave device. So, the Due will tell the Uno what to do, and the Uno tells the RVR…
|
|
Margaret Burnett, University Distinguished ProfessorComputer ScienceOregon State University AbstractHow can software professionals systematically assess whether their software supports diverse…
|
|
|
|
The fourth and final lecture on bolts covers bolt groups, and shearing forces.
|
|
The third lecture on fasteners covers stresses and safety factors.
|
|
The second lecture on threaded fasteners discusses static loads
|
|
The first lecture in threaded fasteners discusses standards and design issues.
|
|
The third and final lecture on springs covers fatigue failure, buckling, and spring surge.
|
|
The second lecture of springs covers loading and stress.
|
|
The first lecture of springs covers basics and design issues.
|
|
The last lecture on gears covers strength and contact stresses and a brief review of design.
|
|
The third lecture on gears focuses on stress and the numerous correction factors involved.
|
|
The second lecture of gears covers some fundamental kinematics and force balancing.
|
|
The first lecture on gears introduces a variety of terminology and types as well as the design issues.
|
|
The second lecture on bearings covers the fatigue life equation
|
|
The first lecture of bearings talks about different types and basic design issues
|
|
The second lecture on shafts covers failure modes, deflection, and critical speed.
|
|
The first lecture on shafts covers basic terminology and design issues.
|
|
The fourth and final lecture on fatigue covers safety factors and stress concentrations
|
|
The third lecture on fatigue goes over a small example and introduces the sig-m sig-a plot
|
|
Second lecture on fatigue covering more of the knockdown factors and characterizing the S-N curve
|
|
The first lecture on fatigue (corresponding loosely with Shigley Ch.6)
|
|
The second lecture in section of failure theories.
|
|
The first lecture in my section on failure theories
|
|
The final lecture in section 2 discusses Mohr's circle as a way to visualize princial stresses.
|
|
Section 2 Loads to Stresses continued. This lecture reviews the stress element and introduces stress concentrations
|
|
Section 2 continued. This lecture reviews shear and moment diagrams.
|
|
Lecture focusing on reviewing types of loads and their stresses. Also impact is covered.
|
|
the second lecture finishes the introduction. it discusses safety and introduces the blender example problem
|