Search for tag: "mechanical design"

27. Fasteners - Mechanical Component Design

The fourth and final lecture on bolts covers bolt groups, and shearing forces.

From  Matthew Campbell 171 plays

26. Fasteners - Mechanical Component Design

The third lecture on fasteners covers stresses and safety factors.

From  Matthew Campbell 179 plays

25. Fasteners - Mechanical Component Design

The second lecture on threaded fasteners discusses static loads

From  Matthew Campbell 177 plays

24. Fasteners - Mechanical Component Design

The first lecture in threaded fasteners discusses standards and design issues.

From  Matthew Campbell 163 plays

23. Springs - Mechanical Component Design

The third and final lecture on springs covers fatigue failure, buckling, and spring surge.

From  Matthew Campbell 163 plays

22. Springs - Mechanical Component Design

The second lecture of springs covers loading and stress.

From  Matthew Campbell 189 plays

21. Springs - Mechanical Component Design

The first lecture of springs covers basics and design issues.

From  Matthew Campbell 183 plays

20. Gears - Mechanical Component Design

The last lecture on gears covers strength and contact stresses and a brief review of design.

From  Matthew Campbell 183 plays

19 Gears - Mechanical Component Design

The third lecture on gears focuses on stress and the numerous correction factors involved.

From  Matthew Campbell 205 plays

18 Gears - Mechanical Component Design

The second lecture of gears covers some fundamental kinematics and force balancing.

From  Matthew Campbell 202 plays

17. Gears - Mechanical Component Design

The first lecture on gears introduces a variety of terminology and types as well as the design issues.

From  Matthew Campbell 199 plays

16. Bearings - Mechanical Component Design

The second lecture on bearings covers the fatigue life equation

From  Matthew Campbell 236 plays

15. Bearings - Mechanical Component Design

The first lecture of bearings talks about different types and basic design issues

From  Matthew Campbell 195 plays

14. Shafts - Mechanical Component Design

The second lecture on shafts covers failure modes, deflection, and critical speed.

From  Matthew Campbell 166 plays

13. Shafts - Mechanical Component Design

The first lecture on shafts covers basic terminology and design issues.

From  Matthew Campbell 191 plays

12. Fatigue - Mechanical Component Design

The fourth and final lecture on fatigue covers safety factors and stress concentrations

From  Matthew Campbell 202 plays

11. Fatigue - Mechanical Component Design

The third lecture on fatigue goes over a small example and introduces the sig-m sig-a plot

From  Matthew Campbell 208 plays

10. Fatigue - Mechanical Component Design

Second lecture on fatigue covering more of the knockdown factors and characterizing the S-N curve

From  Matthew Campbell 201 plays

9. Fatigue - Mechanical Component Design

The first lecture on fatigue (corresponding loosely with Shigley Ch.6)

From  Matthew Campbell 227 plays

8. Stress to Failure (Distortion Energy & Mod. Mohr)

The second lecture in section of failure theories.

From  Matthew Campbell 196 plays

7. Stress to Failure (MNS & MSS)

The first lecture in my section on failure theories

From  Matthew Campbell 251 plays

6. Mohr's Circle

The final lecture in section 2 discusses Mohr's circle as a way to visualize princial stresses.

From  Matthew Campbell 168 plays

5. Stress Element and Stress Concentrations

Section 2 Loads to Stresses continued. This lecture reviews the stress element and introduces stress concentrations

From  Matthew Campbell 249 plays

4. Beam Loading - Mechanical Component Design

Section 2 continued. This lecture reviews shear and moment diagrams.

From  Matthew Campbell 216 plays

3. Loads to Stress - Mechanical Component Design

Lecture focusing on reviewing types of loads and their stresses. Also impact is covered.

From  Matthew Campbell 259 plays

2. Introduction continued - Mechanical Component Design

the second lecture finishes the introduction. it discusses safety and introduces the blender example problem

From  Matthew Campbell 252 plays

1. Introduction - Mechanical Component Design

the first lecture in this upper-level mechanical courses

From  Matthew Campbell 403 plays