-
The fourth and final lecture on bolts covers bolt groups, and shearing forces.
27. Fasteners - Mechanical Component Design
From Matthew Campbell
175 plays -
The third lecture on fasteners covers stresses and safety factors.
26. Fasteners - Mechanical Component Design
From Matthew Campbell
179 plays -
The second lecture on threaded fasteners discusses static loads
25. Fasteners - Mechanical Component Design
From Matthew Campbell
179 plays -
The first lecture in threaded fasteners discusses standards and design issues.
24. Fasteners - Mechanical Component Design
From Matthew Campbell
174 plays -
The third and final lecture on springs covers fatigue failure, buckling, and spring surge.
23. Springs - Mechanical Component Design
From Matthew Campbell
166 plays -
The second lecture of springs covers loading and stress.
22. Springs - Mechanical Component Design
From Matthew Campbell
190 plays -
The first lecture of springs covers basics and design issues.
21. Springs - Mechanical Component Design
From Matthew Campbell
187 plays -
The last lecture on gears covers strength and contact stresses and a brief review of design.
20. Gears - Mechanical Component Design
From Matthew Campbell
184 plays -
The third lecture on gears focuses on stress and the numerous correction factors involved.
19 Gears - Mechanical Component Design
From Matthew Campbell
206 plays -
The second lecture of gears covers some fundamental kinematics and force balancing.
18 Gears - Mechanical Component Design
From Matthew Campbell
204 plays -
The first lecture on gears introduces a variety of terminology and types as well as the design issues.
17. Gears - Mechanical Component Design
From Matthew Campbell
208 plays -
The second lecture on bearings covers the fatigue life equation
16. Bearings - Mechanical Component Design
From Matthew Campbell
247 plays -
The first lecture of bearings talks about different types and basic design issues
15. Bearings - Mechanical Component Design
From Matthew Campbell
202 plays -
The second lecture on shafts covers failure modes, deflection, and critical speed.
14. Shafts - Mechanical Component Design
From Matthew Campbell
170 plays -
The first lecture on shafts covers basic terminology and design issues.
13. Shafts - Mechanical Component Design
From Matthew Campbell
196 plays
Search for ""