ME383 Mechanical Component Design
-
From Matthew Campbell September 22nd, 2020
175 playsThe fourth and final lecture on bolts covers bolt groups, and shearing forces. -
From Matthew Campbell September 21st, 2020
179 playsThe third lecture on fasteners covers stresses and safety factors. -
From Matthew Campbell September 21st, 2020
178 playsThe second lecture on threaded fasteners discusses static loads -
From Matthew Campbell September 21st, 2020
169 playsThe first lecture in threaded fasteners discusses standards and design issues. -
From Matthew Campbell September 14th, 2020
165 playsThe third and final lecture on springs covers fatigue failure, buckling, and spring surge. -
From Matthew Campbell September 14th, 2020
190 playsThe second lecture of springs covers loading and stress. -
From Matthew Campbell September 14th, 2020
187 playsThe first lecture of springs covers basics and design issues. -
From Matthew Campbell September 11th, 2020
184 playsThe last lecture on gears covers strength and contact stresses and a brief review of design. -
From Matthew Campbell September 11th, 2020
206 playsThe third lecture on gears focuses on stress and the numerous correction factors involved. -
From Matthew Campbell September 11th, 2020
204 playsThe second lecture of gears covers some fundamental kinematics and force balancing. -
From Matthew Campbell September 10th, 2020
203 playsThe first lecture on gears introduces a variety of terminology and types as well as the design issues. -
From Matthew Campbell September 8th, 2020
245 playsThe second lecture on bearings covers the fatigue life equation -
From Matthew Campbell September 8th, 2020
201 playsThe first lecture of bearings talks about different types and basic design issues -
From Matthew Campbell September 4th, 2020
170 playsThe second lecture on shafts covers failure modes, deflection, and critical speed. -
From Matthew Campbell September 4th, 2020
195 playsThe first lecture on shafts covers basic terminology and design issues.